[FaithTag] How to Prevent Blurry and Missing Prints

[FaithTag] How to Prevent Blurry and Missing Prints

Unclear printouts are usually caused by the following reasons:
Low battery level/Insufficient print density/Unclean printhead/Subpar image quality

1. Maintain a High Battery Level for the Printer.

To avoid compromised print quality, keep the printer's battery sufficiently charged. Should the battery level fall below 30%, we recommend charging it for 2 hours prior to printing.
The printer's battery status can be checked by double-clicking the power button, which generate a QR code displaying the current battery level.

Note: For accurate battery information, please refrain from charging the printer while printing the QR code.

2. Clean the Print Head.

Use alcohol wipes to clean the printe's cutting section, paying close attention to areas with black line, to ensure no adhesive residue or foreign materials are obstructing the print head.
The following are the areas of the print head that need to be cleaned:


3. Increase Print Density.

Going to the "Print Settings" option and adjust the print density as needed to enhance print clarity.



4. Switch to another Thermal Paper Roll.

Expired, moisture-exposed, or low-quality thermal print paper can significantly impact print quality. Please use another thermal print paper and print again.

5. Improve the Quality of Print Images.

The fidelity of printed images heavily relies on the quality of the original image. Please ensure that images are of high resolution to achieve the best print quality.

6. Upgrade FaithTag.

Notes
Please check your app version. If it's not up to date, kindly update it in the app store and then try printing again.

7. Contact Support                                                                                                                                                                

If the issue persists, please contact our support team and provide the following information:
  1. Images of both original and the printed output.
  2. The printer's SN and firmware version (accessible via the "FaithTag" app).
  3. Your order number, purchase date, and purchase platform.

    • Related Articles

    • [FaithTag] How to Prevent Blank Printouts

      Blank printouts can typically be attributed to the following reasons: Incorrect Paper Type / Improper Paper Loading 1. Confirm Paper Type： Mare sure you are using the thermal print paper, you can verify it by checking the packaging or the product ...

    • [FaithTag] How to Connect Printer via Bluetooth to Mobile Devices

      1. Turning on the Printer Hold the power button for about 3 seconds. Release when the power indicator light is on. 2. Installing the FaithTag App Download the "FaithTag" App either by visiting provided link or scanning the QR code below. Download the ...

    • [FaithTag ] How to find the printer's serial number (SN) ?

      There are two ways to access the SN of the printer: Connecting to "FaithTag" app or Printing a self-test page. 1. Option1: Connecting to "FaithTag" App to access SN. Open the "FaithTag" App. Tap the printer icon in the upper left corner to search for ...

    • [FaithTag]How to Load Thermal Paper and Print Correctly

      1. Load the Thermal Paper Roll Properly Open the printer's top cover and load the thermal paper roll. Close the top cover properly. Here are demo videos about how to install thermal paper roll correctly: 2. Check the Status of the Printer Power on ...

    • [FaithTag]How to Charge Your Printer Correctly

      1. Please switch another cable and make sure using 5V-2A power adapter. 1. Please Try with different data cables. 2. Please reconfirm that the output voltage of the charging head in use is 5V-2A. Fast chargers with output voltage exceeding 5V may ...